UV Printer – Four Features to Consider When Purchasing a UV Printer.

Would you like to put in a photo to your quilt that looked a lot more like portion of the fabric than an iron-on decal?

Previously, we used photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s an excellent new way of getting your favorite photo out of your scrapbook and to your quilt block.

Direct-to-garment (DTG) printing is a form of digital printing. With a expense of about $20,000, it’s not practical to run out and purchase your own DTG printer. The standard price for ripple printer is $8 to $10.

This method is a bit more expensive than the traditional photo transfer method. That’s partially for the reason that technology is really new. Should you do opt to try a DTG photo on your own memory quilt block, there are many things to look for when deciding on the printer which will carry out the be right for you:

1. Ensure you can find no chemicals found it necessary to pre-treat your fabric first. Some DTG printers create a graphic which is more like screen printing. You don’t want that appear or feel on your quilt. The ink is going to be hard in addition to the material and can eventually (sometimes much sooner than later) are going to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. Provided you can experience the ink is raised above the surface in any way at all, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing made available from the Brother GT 541. You can find no chemicals needed to pre-treat the material. The inks bond with all the natural fibers and are heat cured to create the picture. The inks are water based, that helps leave a soft yet crisp image on the fabric.

There are some downfalls to using led uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is really a form an electronic printing, there is not any white ink. White is the absence of color. Which means that you cannot print a photo on navy blue or black fabric.

Digital garment or fabric printing is really a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to get a full spectrum of accurate colors – simply not white. You will find DTG printers that print white ink, but many of these require chemical pre-management of the material and may leave you with that thick surface print.

You need to make use of a light colored or neutral fabric and it should be cotton or possibly a cotton blend. The fabric must have the ability to withstand 350 degrees for around thirty seconds. If you are not 09dexypky with 100 percent cotton or even a 50/50 blend, ask your printer in the event the fabric will continue to work.

Size of your print might be a limitation. Most DTG printers have got a printing field approximately 14 inches x 16 inches. For the majority of quilters, that size range won’t be described as a problem.

And talking about printing fields, here’s a hint. Most direct to garment printer charge for the 14×16 surface. In case your blocks enables 2 or 3 photos to suit within that range, you can get all of them printed for the price tag on one. Check with the printer to ascertain if it’s possible along with your particular project.

Like the majority of technological advances, the cost of digital garment (or fabric) printing will probably decrease after a while. Maybe it can be also on smaller printers for home and private use. Until then, see if you can get a DTG printer for your forthcoming photo quilt project. The results will look like custom fabric, that will be an excellent touch for the unique quilt!